CR79.10 Mil Mylar Adhesive Backed PVC Cards

CR7910 adhesive backed Mylar PVC cards are ideal for printing on most direct-to-card printers. Mylar backing offers greater thickness for easier feeding. CR7910 adhesive back PVC cards are typically applied to proximity/technology cards.

Adhesive-backed CR79 cards are slightly smaller dimensionally than the standard CR80, measuring 3.303'' x 2.051''. CR79 10 mil cards are made to fit into the inside edge of a proximity card.

CR79 10 mil Mylar adhesive back cards are also known as:

• CR7910
• CR79.010
• 79.010-MYAB

CR7910MYAB cards are vision-inspected to ensure quality.

Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.

Remember: If you're placing these cards on pre-slotted access control cards, you will need a slot punch to render a hole in the adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead. See our Slot Punches section for options.

Note: Card thickness is 20 mil before removal of 10 mil adhesive back. 20 mil cards may not feed into every card printer. Please check your card printer specifications. If you are unsure if your printer is capable of printing on these thin cards, call us at (800) 321-4405 x2 or chat live.